By Market
Application Scenarios
Modeled scenarios using THERMGLASS calculators — not completed installations. Each entry shows the problem addressed, the glazing solution specified, and the modeled energy and comfort outcomes behind it.
Modeled: wheelhouse refit, 55 m motor yacht
Modeled refit scenario: a North Atlantic charter yacht whose bridge glass fogs on every cold-season transit, re-glazed with 6.3 mm vacuum units dropped into the original rebates.
Read the scenario Cold StorageModeled: glass door retrofit, frozen-food cold store
Modeled retrofit: glass freezer doors that fog and ice through every defrost cycle, re-glazed with vacuum insulating glass to cut door heat gain at the source.
Read the scenario Passive HouseModeled: townhouse deep retrofit, passive-house target
Modeled scenario: a 1970s townhouse deep-energy retrofit targeting passive-house-level glazing performance in a 6.3 mm build that fits the original sash rebates.
Read the scenario HVAC & RefrigerationModeled: display case retrofit, regional supermarket
Modeled scenario: a regional supermarket running heated glass doors around the clock — VIG re-glazing targets the door heat gain and the anti-sweat heater load at the same time.
Read the scenario RV & MobileModeled: camper van re-glaze, four-season build
Modeled scenario: a four-season camper van conversion whose factory windows fog through every winter trip, re-glazed with slim vacuum units sized to the original wall openings.
Read the scenario Construction VehiclesModeled: cab glazing retrofit, 20-tonne excavator fleet
Modeled scenario: a winter-working excavator fleet whose cab glass fogs and frosts through every cold shift, re-specified with slim vacuum units in the safety-glazing grades the cabs require.
Read the scenario ArchitecturalModeled: curtain wall re-specification, cold-climate office tower
Modeled scenario: a cold-climate office tower whose code-minimum double-glazed curtain wall drives perimeter complaints and heating load, re-specified with slim vacuum units in the existing glazing pockets.
Read the scenario Building-Integrated PVModeled: solar facade re-specification, net-zero office
Modeled scenario: a net-zero office retrofit that has run out of roof, re-specified with building-integrated photovoltaic glass laminated to vacuum glazing — generation and warm-edge insulation in one unit.
Read the scenario Passive HouseModeled: certification-track new build, cold-climate zone 5
A zone 5 single-family new build where the glazing package is the certification decision: hybrid VIG clearing the PHIUS 2021 glazing target, with modeled figures from the Passive House ROI engine.
Read the scenario MarineModeled: world-cruise charter yacht, bridge re-spec at engine defaults
A 60 m world-cruise charter yacht where the bridge HVAC bill is a fuel-line item: 30 m² of glazing re-specified from standard double-pane to standalone VIG, modeled at the marine ROI engine's exact default scenario.
Read the scenarioEvery figure on these pages is labeled modeled or calculated for a reason: THERMGLASS publishes calculation-derived performance, and certified test data supersedes calculated values as programs complete. Run your own project through the linked calculators for project-specific numbers.
