An energy savings calculator is only as accurate as its inputs. THERMGLASS operates six ROI engines — for architectural, refrigeration, marine, heavy equipment, Passive House residential, and BIPV + VIG applications — each built on engineering-backed thermal models.
The Six ROI Engines and Their Underlying Models
Architectural ROI Engine
Model: ASHRAE Handbook of Fundamentals + NREL TMY3 / JRC PVGIS-5 solar irradiance data Analysis horizon: 25 years
Refrigeration ROI Engine
Model: ASHRAE Refrigeration Handbook 2022, Chapters 15 and 24 Analysis horizon: 15 years
Marine ROI Engine
Model: ASHRAE HVAC Applications 2023, Chapter 11 / DNV Rules for Ships Analysis horizon: 20 years
Heavy Equipment ROI Engine
Model: SAE J1503 cab thermal model Analysis horizon: 10 years
Passive House ROI Engine
Model: PHI / PHIUS residential criteria with ISO 10077-1 whole-window Uw inputs Analysis horizon: multi-period NPV scenarios
BIPV + VIG ROI Engine
Model: dual-stream analysis — architectural thermal savings plus photovoltaic generation revenue
Getting Accurate Inputs
Glazed Area
Enter the total glazed area you're upgrading, not the total window opening. For curtain wall systems, use the vision glass area only.
Baseline U-Value
Use the whole-window U-value (Uw), not the center-of-glass value. If unavailable, use the engine's default: 0.45 Btu/h·ft²·°F (US — a double-pane low-E whole-window, ≈2.56 W/m²·K) or 1.40 W/m²·K (EU, the same build on the EN basis).
VIG U-Value
- EU default: 0.73 W/m²·K (ISO 10077-1 derived)
- US default: 0.13 Btu/h·ft²·°F
Fuel Type and Cost
| Fuel Type | US Default | EU Default |
|---|---|---|
| Natural gas | $1.35/therm | €1.10/m³ |
| Heating oil | $4.20/gallon | €1.45/litre |
| Electric resistance | $0.16/kWh | €0.28/kWh |
| District heat | $0.10/kWh_th | €0.11/kWh_th |
Enter your actual utility rate — using the default when your actual rate is 40% higher will understate your ROI proportionally.
Interpreting the Outputs
Simple Payback Period
Total installed VIG cost ÷ annual energy savings. A quick filter: under 5 years is almost certainly NPV-positive; over 15 years is marginal.
25-Year NPV
Present value of all future energy savings, discounted at the specified rate, minus the initial investment. NPV is the correct decision metric for capital allocation.
Common mistake: Treating NPV as linear. A 10-year NPV is not half of a 25-year NPV — always compute via the annuity formula.
Annual CO₂ Avoided
Calculated using fuel-specific emission factors: natural gas 0.181 kg CO₂/kWh thermal; heating oil 0.270 kg CO₂/kWh thermal.
Common Calculation Errors
- Using COG U-values instead of whole-window Uw
- Ignoring cooling savings in warm climates
- Using list price instead of installed cost premium
- Not running sensitivity analysis on energy costs
Open the ROI Engine for your application and run your project numbers.
Key Takeaways
- Use whole-window Uw values (ISO 10077-1) for both baseline and VIG inputs
- Enter your actual fuel cost and electricity rate
- The architectural engine calculates both heating and cooling savings
- NPV is the correct decision metric; simple payback is a quick filter only
- Each engine exports a PDF report for energy documentation and capital presentations
Keep reading
The defaults above are starting points, not verdicts. The VIG vs triple glazing payback sweep shows how much climate zone, heating fuel, and the installed premium each move the answer before you commit to an assumption.
Skip the manual inputs where it matters: the architectural ROI configurator runs the same assumptions and returns a payback estimate for your building.




